Benefits of Wall Mounted Single-slope single-direction/bi-parting Retractable Sunroom
Wall-mounted Single-slope single-direction
Rails hug the façade; service paths and outdoor seating stay put. Quick bounce-back after showers. Best for street/terrace sites, depth ≤ 7 m
Bigger opening, bigger ambience
Wide span, outdoor vibe
Split at center with fewer posts and centered sightlines—great for pools and aisle-centric weddings. Best for pools, lawns, symmetric atriums/banquets
Dual/multi-motor sync, up to 75–80% opening (design target) for airflow and that open-sky feel—premium buy-outs get easier.
Wind/rain sensors auto-close; with side screens/heaters (where allowed), +2–3 months is common in temperate cities. Depends on climate, rules, setup
Rain won’t ruin the shift
Fast install, lighter spend: one-side stow + modular units
Event-friendly layouts: uninterrupted center aisle
Fewer parts, quicker build, less business disruption; fewer maintenance points, steadier TCO. Typically lower CAPEX than wide-span
For fast switches between stage/runway/dining; easy lighting/sound/BMS scenes.
Keeps aisles clear, no seat shuffle
Wall-mounted Single-slope bi-parting
Clean storefront, camera-ready
Single-slope drains outward, near-façade stow keeps skyline/streetline; easy lights/logos/menus.
Natural run-off, fewer clogs
Water to open drip edges/scuppers—no hidden gutters; just plan drain channel & anti-slip. Subject to engineering, loads, local approvals
Higher bar, stronger punch
Setup proceeds even when weather wobbles—fewer cancellations/reschedules for weddings/brand shows.
Fewer rain-day headaches
Center beam/rails + multi-drive need dedicated checks; CAPEX is typically higher than single-slope, but spans go bigger with redundancy (degraded mode if a drive fails). Natural run-off to both outer edges; ridge cap/seals manage the rain line. Subject to structural loads & approvals
Explore Wall-Mounted Single-Slope Single direction/Bi-Parting Retractable Sunrooms
Clear Span Wall-mounted Arched roof Single-direction &Bi-parting Retractable Sunroom Spec Sheet & Sizing Guide
Happy Customers, Open Skies
Sunease Large Smart Retractable Spaces Key Features
Engineered for What Matters
·Wide spans, no interior columns for clear layouts and premium sightlines.
·Verified to 50-year return wind/snow and local extreme-weather criteria with finite-element simulation; stamped calculations available on request.
What You Get → Why You Can Trust It
·Stronger, lighter frames → Proprietary 6061-T6 profiles
Our patented aluminum sections deliver high strength at low weight with excellent formability/weldability—an aerospace-grade alloy adapted to architecture.
Profile traceability (heat/batch) is retained.
·Rock-solid connections → In-house steel inserts, not generic angles
Q235B laser-cut, welded, galvanized inserts reinforce critical nodes for wind/snow resistance and long-term stability—designed to code (50-year wind/snow, seismic, rainfall).
·Big spans, fast installs → Prefabricated assembly
Typical spans 5–20 m; extended 20–50 m with our 150/190/250 (and larger) modules. Factory prefabrication + on-site assembly means cleaner sites and 3–10 days typical installation (site-dependent).
·Dry interiors in real rain → Five-stage water management
Multi-seal strategy plus natural run-off (drip edges/scuppers—no hidden gutters). Every project gets a hose/pond test during commissioning.
·Quiet, refined movement → Hidden 24 V BLDC drives
Concealed, low-voltage brushless motors for safety, smooth travel, and ultra-low noise. Over-current protection and manual override are standard.
·Comfort that lowers OPEX → Laminated insulated glazing
Roof/façade laminated IGU improves thermal and acoustic performance; one-touch open/close brings natural ventilation to reduce HVAC load.
·Controls that fit your site → Smart & BMS-ready
Local switch, remote/App, wind/rain sensors, and BMS integration. Scene presets (day/party/storm) available.
·Built for your climate & brand → Options that matter
PVDF fluorocarbon finish (self-cleaning, fade-resistant; 15-year finish / 30-year profile warranty). 316 hardware & marine coatings for coastal sites. RAL colors, logos, lighting for brand presence.
Proof of Quality (Before You Receive It)
·Four-gate QC: IQC → IPQC → FQC (trial erection & leak test) → PQC (itemized BOM check).
·Certifications & reports: ISO 9001/14001/45001, CE/CCC/RoHS/SGS where applicable; incoming inspection records kept for aluminum, steel, glass, PC, motors, cables.
·Documentation pack: stamped calcs, O&M manual, wiring schematics, warranty letter—provided at handover.
·References: hotel rooftops, pools, atria, marina/coastal sites—reference calls and site visits available.
Where It Works Best
Smart retractable sunrooms, luxury pool enclosures, restaurant terraces, outdoor showrooms, atrium skylights, club & marina decks, sunken courtyards—any venue that needs open-sky ambience on clear days and business continuity in rain.
Step-by-Step Installation of a Clear Span Tent
Site Survey & Engineering Check
Measurement & Layout
Off-Site Fabrication
Delivery & Staging
Anchorage Preparation
Rail & Frame Installation
Verify structure/anchorage, clearances, load paths, and run-off direction; confirm local code & permits.
Final laser measurements; set reference lines for rails, posts, fascia, and drain path.
Profiles cut & CNC-drilled; glazing/panels prepared; wiring looms and control cabinet pre-assembled.
Modules labeled by sequence; protect finishes; hoist/route plan finalized.
Chemical/mechanical anchors on façade/beam; corrosion package per site (e.g., 316 hardware in coastal areas).
Single-slope one-way: wall-hugging rails first, then fixed frames, then sliding modules stack on one side.
Bi-directional split: center spine leveled, opposing rails aligned, then modules installed symmetrically.
2
3
4
5
1
6
Panels & Drive System
7
Install side screens/doors, blinds/shading, lighting/AV, and seals/gaskets.
8
Electrical & Controls
Form drip edges/scuppers; set splash direction; add floor anti-slip and linear drain where needed.
9
Natural Drainage Details
Connect control box, sensors (wind/rain/temperature), local switch & remote/APP; test BMS hook if required.
10
Perimeter & Options
Fit sliding modules, motors/gearboxes (or manual hardware), limit switches, and safety stops.
11
Commissioning & QA
Open/close cycles, sync check, leak test, noise check, emergency stop; hand over O&M guide.
12
Training & Handover
User training (modes: day/party/wedding/storm), cleaning & inspection routine, warranty activation.