Pools & Courtyards Case— All Weather

Mobile sunroom: year-round use, lower upkeep/energy, higher asset value—strong ROI.

+4h/day

≤60 dB

Quick install

Heat stress & chlorine corrosion near pools.

Wind-borne dust; need silent closing for guests.

Permit complexity for permanent roofs.

• Free-standing gable, single/bi-parting

• Free-standing arched roof,multi-slope

• Atrium cover (non-permanent design)

Sealing

Wind/Snow

Finish

Controls

EPDM labyrinth + five-path drainage

Typhoon 12–17; Snow 30–200 kg/m² (design-dependent)

Fluorocarbon coating; coastal-grade corrosion resistance

BLDC/Siemens options; BMS/Fire I/O; sensors

• +4 h/day typical; faster payback (1–6/12 mo)

• Prefab≈50%; install 3–10 days; one-yr review

• ISO/SGS; stamped calcs per region; method statements

• ISO9001/14001/45001, SGS test summaries

• Wind/snow stamped calcs by region

• Spec, drawings list, method statement, rigging outline

• QA/QC & commissioning checklists, O&M

• Stamped BOM & photo logs; milestone-based release

• Factory visits & remote training

Typical on-site timeline 3-10 days with a 4-6 person crew, Prefab ratio ≈ 50%. Zero on-site welding; clean retrofit for rooftops and atriums.

Design follows local codes (EU: EN 1991; US: ASCE 7; AU: AS/NZS 1170). Typical urban wind and snow zones are covered. Typhoon/high-snow regions may require heavier sections, denser purlins, or zoned control strategies [subject to review].

We adopt an integrated strategy of passive drainage plus multi-stage sealing to achieve no leakage under typical heavy rain, with redundancy and care guidance for extreme events.

Exterior, natural drainage: Runoff is managed by roof pitch, drip edges, and node-guided flow; there are no internal drainage channels.

Minimum roof pitch: ≥2% (≈1:50).

Façade/side: EPDM labyrinth sealing with five-path drainage for enhanced redundancy.

Overlapping sashes & sliding ends: Labyrinth sealing with dual seals at sliding joints/ends, effectively resisting water ingress, sand/dust, and wind-driven rain.

Openable system: Interlocking male–female profiles forming a five-layer waterproof architecture, maintaining continuous sealing in both open/close cycles.

Performance note: No leakage in typical heavy rain; for wind-driven rain or extreme storms, verify pitch, eave details, and overlaps per local codes, and provide external discharge paths and overflow provisions (site-specific).

Maintenance: Periodically inspect and clean EPDM gaskets, overlaps, and drainage paths; replace or re-seat as needed to keep the five-path drainage clear.

It can interlock with fire alarm systems (auto open/close per local strategy) and integrates to BMS via BACnet/Modbus. Final logic follows AHJ/fire engineer requirements.

Whole 1 yr，Aluminum 30 yrs，motor 1yr；Remote training supported.

Benefits  

•Year-round use: open on clear days; keep swimming and lounging in rain/wind(natural drainage with edge run-off).

•Clear-span modules preserve pool deck and courtyard flow; low-noise drive and lighting presets elevate ambience & reviews.

•UV/heat control with anti-condensation design; thermal-break profiles reduce energy use and improve comfort.

Recommended Models

•One-way — wall-attached single-slope/multi-slope/arched over pool edge or courtyard façade; opening target ~70–75%.

•Bi-parting — center-opening symmetry to clear the waterline/courtyard axis; opening target ~75–80%.

•Enclosure: perimeter seals for all-weather use; optional screens and roof/side vents for humidity control.

•Pool-ready durability: chlorine/salt-resistant finishes with safety laminated/tempered glazing.

•Prefabricated modules: 3–10 days typical on site.

•Glazing: laminated double-tempered glass or solid PC (optional Low-E/UV films; PVDF anti-corrosion finish).